Table 1- TUBING OUTSIDE DIAMETER TOLERANCE
Nominal Tubing OD mm	Tolerance OD ±mm	Tolerance ID ±mm
Up to 9.50	0.05	0.05
Over 9.50 to 15.88 inclusive	0.06	0.06
Over 15.88 to 50.80 inclusive	0.08	0.08
Over 50.8 to 63.50 inclusive	0.10	0.10
Over 63.50 to 76.20 inclusive	0.13	0.13
Over 76.20 to 100.00 inclusive	0.15	0.15
WT tolerance shall be not more than 10%

Table 2- TUBING WALL THICKNESS TOLERANCE
Nominal Wall Thickness	Nominal OD Through 22mm ±mm	Nominal OD 22-48mm ±mm	Nominal OD 48-100mm ±mm
0.89	0.05/0.05	0.05/0.05	0.05/0.05
1.00	0.05/0.05	0.05/0.08	0.05/0.08
1.25	0.05/0.05	0.05/0.08	0.05/0.08

1.50	0.05/0.05	0.05/0.08	0.05/0.08
1.65	0.05/0.05	0.05/0.08	0.05/0.08
2.00	0.05/0.05	0.05/0.08	0.05/0.08
2.11	0.05/0.05	0.05/0.08	0.05/0.08

2.410	0.05/0.05	0.05/0.08	0.08/0.08
2.500	0.05/0.08	0.05/0.10	0.08/0.08
2.770	0.05/0.08	0.05/0.10	0.08/0.08
3.000	0.05/0.08	0.05/0.10	0.08/0.08
3.050	0.05/0.08	0.05/0.10	0.08/0.08

3.40	-	0.05/0.10	0.08/0.08
3.75	-	0.05/0.10	0.08/0.08
4.00	-	0.08/0.10	0.08/0.10
4.19	-	0.08/0.10	0.08/0.10
4.57	-	0.10/0.10	0.08/0.13
5.00	-	0.10/0.13	0.10/0.13

Table 2- CHEMICAL REQUIREMENTS
Element				%
Carbon				0.06-0.18
Manganese				0.30 to 0.60
Phosphprus				0.040 max
Sulfur				0.050 max

1. --Delivery: 60-70 days after receiving 30% T/T in advance

2. --Payment terms: 30% T/T in advance, the balance 70% paid before shipment.

3. --Packaging: antirust protection, In hexagon bundles

4. --Marks on pipes(tubes): Standard,Steel Grade, Size, Heat No.( or at the buyer's option).

5. --Mill Test Certificate:EN10204 3.1

For Application of:

Cutting to Specified Length,

Packing Could be in Cartons or Wooden Boxes

Inquiry Cart 0