TORICH INTERNATIONAL LIMITED
Add to Cart
High Quality BS EN 10241 Galvanized Carbon Steel Pipe used in Transportation
The pipe of the EN10241shall have a smooth surface consistent with the manufacturing process and be free from burrs; surface marks may be ground. Unless otherwise specified in the table below. Repairs by weldiing, other than the weld seam, are forbidden.Welded or seamless steel tubes, forging and rolled bars. It is applicable to those threaded steel pipe fittings that are used in the transportation and distribution of liquid or gas.
| Pipe | Standard |
| Water/Gas Steel Pipe | API5L/5CT ASTMA53/A795/EN10255/BS1387/AS1163/AS1047/ISO065 |
| Structure Steel Hollow Section | ASTMA500/A252/EN10219/EN10210/EN39/EN10305 |
| Conduit Pipes | ANSI C80.1/C80.3/C80.6/BS4568 |
| Circular Hollow Section OD | Hot Dipped Galvanizing |
| Square/Rectangular Hollow Section OD | 10*10-400*400 |
| Color Primer | Red/Blure/Black/Grey |
| Hot Dipped Galvanizing | 30 micron-85micron |
| Hot Dipped Galvanizing | 10 micron-35micron |
Chemical Composition of fabricated fittings and tubulars
| C max% | Mn max% | P max% | S max% |
| 0.25 | 1.40 | 0.045 | 0.045 |
Mechanical properties of fabricated fittings and tubulars
| Tensile strength min | Yieds strength min | Elongation min |
| 320 | 195 | 20 |
Packing
Producing Process